multi move

[TattieBoJangle]

Hi guys is there anyway you can set up the multi select move as you did with the Y axis I have a line of things and need to move them a little to the right but when I select them and use the Position X they all just bunch together I remember you done this for the Y axis.

[SolarPortal]

will look at it now

[SolarPortal]

Checked this out and it still seems to work.

Select multiple entities in the scene, open the translation utility and set the X Axis to a value, all of them will move.

What you might be getting is the same as the duplicate. When you move using the gizmo, the meshes sometimes all move to the same spot. All i need is a replicable fault and it will be done
We know how to get around the duplicate bug as well.

Hope this helps

[TattieBoJangle]

Doesn't seem to work for me at all just groups the meshes together even if I start a new scene and use 3 boxes they group together

[SolarPortal]

i see now. I believe there has been a misunderstanding in the feature set.

You are setting all the selected meshes to a specific x value on the x axis which means they will sit on the same position as we did for the Y up thing. This feature was for the roads that had different heights to be aligned and same with there x/z axis for the pavements.

What you are wanting is to move all the assets by a select X amount relative to their current position. This is a different way the multi select tool can be used and will require programmed in. This will require a switch for the axis move.
This mode seems like what you would normally expect lol as before the other feature, the translation tool did not work with multi select.

Hope this helps